Specifications

Williams Strength Signature Line

Racks:

  • All adjustment posts are 4″ x 3″ 7 gauge steel
  • Frames are 3″ x 3″  7-gauge frames
  • All frames are connected with 1/2″ bolts with 3/8″ thick backer plates for the strongest connection available
  • For a finished look, tubing is tapped for 1/2″ bolts for all accessories such as chain storage, weight storage, lock-in bench system, etc.

0-90 Benches:

  • Frames are 3″ x 2″ 7-gauge
  • Available without steps, with spotter steps or with extra large spotting platform

Platforms:

  • Available in solid oak hardwood, all-rubber, and colored center rubber
  • Frames are constructed from special-made 11-gauge “C” channel, which encases the entire platform

Other Equipment:

  • Combination of 3″ x 2″, 3″ x 3″, 4″ x 3″, 7- and 11-gauge steel

Paint System:

  • In-house powder coating system allows quick color changes, so custom colors are always available

Wood Products:

  • Solid oak hardwood platforms are coated with 3-4 layers of professional grade gym floor polyurethane and cured in our climate controlled room

Delivery and Set Up:

  • Performance Strength Design employees are available to install one piece or a complete weight room

custom color options available

 

Williams Strength Deluxe Line

Racks:

  • All adjustment posts are 3″ x 3″ 11-gauge steel
  • Frames are 3″ x 3″ 11-gauge frames
  • All frames are connected with 1/2″ bolts with 3/8″ thick backer plates for the strongest connection available

Benches:

  • Frames are 3″ x 2″ 11-gauge
  • Available with or without spotter steps

Platforms:

  • Available in solid oak hardwood and all rubber
  • Frames are constructed with 2″ x 2″ 11-gauge tubing.

Other Equipment:

  • Combination of 3″x2″,   3″x3″,   4″x3″,   11-gauge steel.

Paint System:

  • In-house powder coating system allows quick color changes, so custom colors are always available

Wood Products:

  • Solid oak hardwood platforms are coated with 3 – 4 layers of professional grade gym floor polyurethane and cured in our climate controlled room

Delivery and Set Up:

  • Performance Strength Design employees are available to install one piece or a complete weight room

custom color options available

 

Force Line

Racks:

  • Arch logos available
  • Backer plates at connection points for solid construction
  • Quick-adjust band peg attachments available, allowing for proper band adjustment for users of different heights
  • Full-rack two-piece safety spotters will not bend
  • Half racks and double half racks have 27 1/2″ between weight post and adjustment post for easy spotter access.  No need to climb under bar!
  • Inside pegs provide plenty of storage for bumper plates, bands, chains, etc.

0-90 Benches:

  • 0-90 Benches have a solid brace in flat position to safely handle the heaviest loads
  • Quick-adjust back and seat pads have no pop pins to lose
  • Large 6″x24″ steps are angled up for proper spotting height
  • Color high-wear logos on clear plastic prolongs pad use

Frames

  • All rack frames are 3″x3″ 11-gauge steel
  • Adjustment posts have 3″ hole spacing
  • Other frames are 3″x2″ and 2″x2″ 11-gauge steel

Weight Storage Pegs

  • All weight storage pegs are 1″ solid steel and go completely through tubing for a solid connection that will not break off

Paint

  • All equipment is pre-treated with an iron phosphate wash and powder-coated
  • High-wear areas are textured powder-coated

custom color options available